Hi all,
We have configure Sync E between ASR 9010 and ASR 903, but frequency not sync
This is configure on 2 ASR:
ASR 9010 (T0/0/1/1) ----- ASR 903 (T0/1/8)
ASR 9010
Configuration Sync-E on ASR9010:
!
frequency synchronization
quality itu-t option 1
clock-interface timing-mode system
system timing-mode line-only
!
interface TenGigE0/0/1/1
description Ket noi den CO Pham Hung
bundle id 4 mode active
cdp
frequency synchronization
selection input
priority 10
!
ASR 903
network-clock synchronization automatic
!
interface TenGigabitEthernet0/1/8
description Ket noi Metro Core 2 - PO3
mtu 9000
no ip address
synchronous mode
cdp enable
channel-group 3 mode active
end
We check on ASR 9010:
RP/0/RSP1/CPU0:HNI.MC02#sho fre syn int br
Tue Jul 19 10:59:59.171 HaNoi
Flags: > - Up D - Down S - Assigned for selection
d - SSM Disabled x - Peer timed out i - Init state
s - Output squelched
Fl Interface QLrcv QLuse Pri QLsnd Output driven by
==== ======================== ===== ===== === ===== ========================
>S TenGigE0/0/1/0 DNU DNU 100 SEC Internal0 [0/RSP1/CPU0]
>S TenGigE0/0/1/1 DNU DNU 10 SEC Internal0 [0/RSP1/CPU0]
> TenGigE0/0/1/2 DNU Fail 100 SEC Internal0 [0/RSP1/CPU0]
RP/0/RSP1/CPU0:HNI.MC02#
Pls help us solve this problem
Thanks,
Quynh
