Troubleshooting with VIC3-2E/M cards

[cetgticisco]

Hello,

My configuration : Cisco 2811 with VIC2-2E/M cards

I replace a VIC2-2E/M card with a VIC3-2E/M card. This new card doesn't run (led yellow)

My IOS version is c2800nm-spservicesk9-mz.124-15.t9.bin

François

[Brandon Buffin]

Try upgrading the IOS. According to the following link, you need a minimum of 12.4(15)XW or 12.4(20)T.

http://origin-www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns477/ns296/data_sheet_c78_464185.html

Hope this helps.

Brandon

[cetgticisco]

Brandon,

Thanks for your help.

I call my reseller to get the right ios version...

Best regards

François