05-14-2010 07:39 AM
Hi Experts
I am new to voice need assistance
My scenario
I have a HP3500 curve in production
it has port 10 defined in data vlan 301 and
port 12 defined in voice vlan 310
so i connected port 10 on HP 3500- port 1 on cisco 3650 switch
port 12 on HP 3500 - port 2 on cisco 3650 switch
what configuration is required on port 1 and port 2 on cisco 3650 switch
and the configuration on rest of the ports where the pcs or ip phones will go.
Thanks
Asif
Solved! Go to Solution.
05-27-2010 06:22 AM
Set your port 1 to access vlan 301
Set your port 2 to access vlan 310
Set every other port to access vlan 301 and have a voice vlan of 310
That should look like:
int fa0/1
description Data VLAN uplink
switchport mode access
switchport access vlan 301
int fa0/2
description Voice VLAn uplink
switchport mode access
switchport access vlan 310
int range fa0/3 - 48
description User Access Ports
switchport mode access
switchport access vlan 301
switchport voice vlan 310
Hope this helps
Rick
05-27-2010 06:22 AM
Set your port 1 to access vlan 301
Set your port 2 to access vlan 310
Set every other port to access vlan 301 and have a voice vlan of 310
That should look like:
int fa0/1
description Data VLAN uplink
switchport mode access
switchport access vlan 301
int fa0/2
description Voice VLAn uplink
switchport mode access
switchport access vlan 310
int range fa0/3 - 48
description User Access Ports
switchport mode access
switchport access vlan 301
switchport voice vlan 310
Hope this helps
Rick
05-28-2010 08:49 AM
Thanks that explains very clearly
a quick question
i have 3650 with gig ports then this should be
int gig0/1 or the fa0/1 can also be used
Thanks
Asif
05-28-2010 10:52 AM
Yeah, if it's a 3560G switch use G0/x instead of Fa0/x
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide