05-13-2013 01:16 AM - edited 03-21-2019 07:20 AM
hello,
i work with the UC520 which is connecetd to 3 cisco IP phones. the cisco ip phone 7911 hasn't a button to define for CO line so how can i configure the line pool code for CO line knowing that i use the CCA for configuration. Thanks
05-13-2013 05:42 AM
With CCA I am not sure if you can mix CO Line and steering-digit configurations. However, it is not recommended to use the system as a "key system" anyway; it limits your design and while it is "familiar" for many small businesses it is not a great way to handle calls.
For what its worth this can definitely be done in CLI though.
-Dan
Please rate useful posts.
05-13-2013 06:25 AM
how can i change the CCA mode key system to pbx?
05-13-2013 01:34 PM
As correctly indicated by Daniel above, that is not recomended, meaning, do not do it unless you want bigger problems than the ones you have now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide