01-15-2011 05:22 PM - edited 03-21-2019 03:32 AM
So I can SSH into my UC520 but I can't Telnet into it. When I telnet in, if I type the wrong password it says Authentication Failed then asks me to try again. If I type the right password it stills says Authentication Failed then immediately disconnects me.
I've included all the configuration items that I figured would be relevant. This is probably very simple.. but I'm lost as to what it would be.
aaa new-model
aaa authentication login default enable
aaa authorization exec default local
aaa accounting connection h323 start-stop group radius
aaa session-id common
gw-accounting aaa
username admin privilege 15 secret 5 thepassword1
username admineast privilege 15 password 0 thepassword2
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
password thepassword1
transport input telnet ssh
transport output telnet ssh
line vty 5 100
transport input telnet ssh
transport output telnet ssh
!
01-15-2011 05:23 PM
I should also mention that if I try to connect from CCA 3.0 it says failed, closing CCA could not access via Telnet (wording may be off). I can SSH fine into it though.
01-15-2011 05:38 PM
Although I'd still like to figure out what was wrong.. removing
aaa authorization exec default local
resolved the issue. Previously I could ssh in and it would go straight to exec #, no need to use enable. After removing aaa authorization exec default local I now need to use enable when sshing in, but I can now also telnet in.
05-31-2012 11:19 AM
Hello ,Im having the same issue
aaa new-model
aaa authentication login default local
aaa authentication login Foxtrot_sdm_easyvpn_xauth_ml_1 local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network Foxtrot_sdm_easyvpn_group_ml_1 local
aaa session-id common
i was able to use cca couple days ago and now its just stoped working
and im still able to telnet to it
any ideas ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide