01-05-2011 06:11 AM - edited 03-21-2019 03:29 AM
I am setting up a phone system for our office using:
SPA400 w/ 3 Analog phone lines (No IP phone connection)
SPA9000
3 - SPA504G 4 line phones
2 - WIP310 wireless phones.
The SPA400, SPA9000 and SPA504G's are all updated to the latest available firmware.
I have downloaded the "Beta" Congiguration Wizard (2.1.1.2) and have the system operaitonal, voicemail is working, extension can speed dial each other, but when I try to enable BLF and CP between the SPA504G's it does not work. I never get a red light when a monitored extension is busy. In most configurations, I've tried the monitored lines are "Amber" instead of "Green".
I have tried to configure this w/ only 1 phone monitoring another and it still does not work.
Any suggestions?
Thanks
01-05-2011 11:53 AM
Look in the picture for Line Key 4.
I have a SPA525G though
I have access to a spa504g next week at the earliest for testing.
ext= the extension number you want to monitor
sub= (i believe that is the station name of the phone you want to monitor, the phone i am surveiiling is calle 'station' in the field Station Name)
01-11-2011 11:06 AM
I have the SPA504 configured as shown, but it constantly displays an AMBER light for the station to be monitored. From what I can gather this means the station is not registered properly, but Speed Dial (SD) and Shared Line Appearance (SLA) work for other lines on the phones, but I have not been able to get BLF or CP to work on any of the phones.
01-15-2011 08:25 AM
I tested and have the same problem.
LF and CP does not work.however my keys are green.
works on spa525g but not on spa504g
(firmware 7.4.7)
03-07-2012 09:34 AM
Hi,
has anybody successfully configured the BLF with SPA504 and SPA9000? Whatever I tried, it only subscribe to the BLF (monitoring keys are green), but when a new call is established to monitored line/extension, I would expect it sends NOTIFY to the moniotring phone.... It does not happen..
Thanks a lot in advnace!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide