12-22-2009 07:09 AM - edited 03-21-2019 01:57 AM
I have a simple setup. 2 x FXO lines. 2 x 502 phones. I setup a call blast group (pilot #501) to ring both phones for 10 seconds then forward to extension 201's voicemail. Both phones ring no problem for 10 seconds but then the call disappears. The phone is still ringing on the external side but nothing is ringing or transferring on the UC520. I tried all the options for "no answer forward to" with the same results.
12-22-2009 11:33 AM
I tried it and it works for me, but I am not using SPA502G phones.
Did CCA make your voice ports look like this (511 is my parallel/blast hunt group including all phones)
voice-port 0/1/0
trunk-group ALL_FXO 64
connection plar opx 511
description Configured by CCA 4FXO-0/1/0-Custom-OP
caller-id enable
!
voice-port 0/1/1
trunk-group ALL_FXO 64
connection plar opx 511
description Configured by CCA 4 FXO-0/1/1-Custom-OP
caller-id enable
!
voice-port 0/1/2
trunk-group ALL_FXO 64
connection plar opx 511
description Configured by CCA 4 FXO-0/1/2-Custom-OP
caller-id enable
!
voice-port 0/1/3
trunk-group ALL_FXO 64
connection plar opx 511
description Configured by CCA 4 FXO-0/1/3-Custom-OP
caller-id enable
Doesyour voice hunt group look like this:
voice hunt-group 1 parallel
final 203
list 201,202,203,204
timeout 60
pilot 511
12-22-2009 02:32 PM
I figured it out.
The CFNA timeout on the extensions has to be longer than the timeout on the blast group. I had a CFNA of 15 seconds on the extensions and 20 seconds on the call blast. I changed it to 20 seconds for the extensions and 15 seconds on the blast group and it worked.
Thanks for the input.
01-18-2010 06:17 PM
jcarter, thanks for taking the time to reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide