Cisco UC520 trying to bind a specific IP to a host, here's the config snip:
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.241 10.1.1.255
ip dhcp excluded-address 192.168.10.241 192.168.10.255
ip dhcp excluded-address 10.1.1.1 10.1.1.15
ip dhcp excluded-address 192.168.10.1 192.168.10.15
!
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
!
ip dhcp pool data
import all
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
!
ip dhcp pool CHADWICK
host 192.168.10.2 255.255.255.0
hardware-address 0100.1601.ed0b.e9
client-name CHADWICK
!
ip dhcp pool BROTHER
host 192.168.10.3 255.255.255.0
hardware-address 0190.4ce5.4b47.d6
client-name BRW904CE54B47D6
!
ip dhcp pool NAS
host 192.168.10.11 255.255.255.0
hardware-address 0008.9bc8.8b9d
client-name NAS
Here's the error I keep seeing when debuging dhcp events:
000103: Nov 8 04:26:02.039: DHCPD: Seeing if there is an internally specified pool class:
000104: Nov 8 04:26:02.039: DHCPD: htype 1 chaddr 0008.9bc8.8b9d
000105: Nov 8 04:26:02.039: DHCPD: remote id 020a0000c0a80a0101050001
000106: Nov 8 04:26:02.039: DHCPD: circuit id 00000000
I've played around with for an hour and I can't figure out why it will not give that host the IP address I've set. I'm at a lost.
david