03-01-2009 08:19 AM - edited 03-21-2019 12:57 AM
Has the CCA 1.9 & sip trunk error issue been resolved with the new 1.9.1 TBD release yet?
03-01-2009 11:58 AM
Hi Amir,
Which error exactly are you referring to?
Thanks,
Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc.
03-01-2009 07:11 PM
BTW; Tomoo is aware of this issue (CCA 1.9/SIP Trunk). The error comes up when I configure a UC520 router for SIP Trunk (Cbeyond) service. Basically, immediately after the voice parameter config read completes, the error show up in the Devices window and the SIP Trunk turns red indicating error. If I switch to CCA 1.8, there's no problem and I can continue configure the SIP Trunk and register with the ISP.
Tks., Amir
03-01-2009 07:46 PM
Hi Amir,
CCA 1.9.1 has the fix for the Cbeyond SIP trunk interop issue. It is slated to post to CCO tomorrow. If you need to get an engineering image in advance, please unicast me.
Rgds,
Tomoo
03-02-2009 05:36 PM
CCA 1.9.1 is now on CCO. Details below:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide