01-22-2013 08:20 AM - edited 03-21-2019 06:52 AM
Hello All
I have a Cisco UC560-FXO-K9 with cme version 8.1, the CUE version is 8.0.6.
The system have been working fine since we got it like two years ago but a couple of weeks ago I started to have this issue with the CUE, everytime i call the voicemail of any user i get this message: "Your recording is too short, record a longer message" and i'm unable to leave any message to any user.
I checked the memory and i have enough space for new messages.
The AA is working fine.
Any ideas?
Thanks
Solved! Go to Solution.
01-22-2013 12:34 PM
I would upgrade CUE to version 8.6.5. There are lots of issues with the version of CUE you are running on the 560.
Thanks,
-john
01-22-2013 12:34 PM
I would upgrade CUE to version 8.6.5. There are lots of issues with the version of CUE you are running on the 560.
Thanks,
-john
01-23-2013 08:48 AM
Thanks Johm,
I will try that and let you know how it goes.
Regards
02-06-2013 02:54 PM
Yesterday I did the upgrade and everything is working fine now.
Thanks!!
04-07-2014 09:16 AM
The root cause is that your CUE module is not receiving voice RTP packets, so you are trying to leave a voice mail of size 0 which results in a "too short" error. I discovered the issue by pinging the CUE service-module interface and getting zero replies. It was discovered that the ip access-lists on the routers were causing the loopback0 interface to not be advertised to each other via EIGRP. Once the ip access-list was fixed I was able to leave a voice mail OK.
04-07-2014 09:19 AM
I did not need to upgrade the CUE software to fix this problem. As long as you verify that everything is OK per the Cisco Unity Express Compatibility Matrix, then it is likely a configuration or routing issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide