03-08-2010 10:37 AM - edited 03-21-2019 02:16 AM
Hi all
Can anyone please help me with theis dial plan, it was working ok until we added the spa400 and now all working except the spa400 part
SPA9000
Line 1: IP Line
Line 2: SPA400 - FXO 1 - land line
Line 2: SPA400 - FXO 2 - GSM Gateway
Line 3: Skype for sip
CALL ROUTING RULE - SPA9000
<:L1>7xx.|<:L2>{1}0xx.|<:L2>{2}2xx.|<:L3>3xx.|<:L4>7xx.)
Dial Plan in spa9000 & SPA 921's
(<*97:vmm>|[7023],xxS3|<:0>[89]xxxxxxxxS0|<:2>[6]xxxxxxxxS0|<104:0610551456>|[7023],xxxS3|[7023],[12345789]xxxxxxxxS0|[7023],xx.|[4568]|[4568]x|[4568]xx|[4568]xxx|xxx)
line 1 and 3 call out perfectly when pressed dial prefix
any help much appriciated, thanks in advance
Solved! Go to Solution.
03-09-2010 05:53 AM
Dear Sir;
Your syntax looks wrong, should be something like this
<:L1>7xx.|<:L2{1}>0xx.|<:L2{2}>2xx.|<:L3>3xx.|<:L4>7xx.)
But please check as you have a conflict between L1 and L4 (same prefix)...
On the SPA9000 Line dial plan, please remember to strip out the prefix if required for proper call routing.
Regards
Alberto
03-09-2010 05:53 AM
Dear Sir;
Your syntax looks wrong, should be something like this
<:L1>7xx.|<:L2{1}>0xx.|<:L2{2}>2xx.|<:L3>3xx.|<:L4>7xx.)
But please check as you have a conflict between L1 and L4 (same prefix)...
On the SPA9000 Line dial plan, please remember to strip out the prefix if required for proper call routing.
Regards
Alberto
03-09-2010 10:48 AM
Ok thanks i have just seen my mistake
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide