cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
248
Views
0
Helpful
1
Replies

How can I talk to a Cisco SPA112 when it won't connect?

brucecisco
Level 1
Level 1

1. DHCP is working and provides IP addresses for everything else connected

2. the voice modem has been rebooted and reset both -- twice

3. ***** 112# says the IP address is 0.0.0.0

4. I've tried reserving an address for the MAC address, no go either but the modem sees that it is the "vopi-ip" device, so *some* talking is going on between them, but it doesn't show in the IP tables.

What will work?

1 Accepted Solution

Accepted Solutions

brucecisco
Level 1
Level 1

OK. Never mind. I now conclude that Cisco doesn't give a **bleep** about the little people and their pesky problems. I've now ordered a Grand Stream 802 that comes highly recommended. I now have a new paper weight.

View solution in original post

1 Reply 1

brucecisco
Level 1
Level 1

OK. Never mind. I now conclude that Cisco doesn't give a **bleep** about the little people and their pesky problems. I've now ordered a Grand Stream 802 that comes highly recommended. I now have a new paper weight.