I have an chance to buy a new old-stock UC520-8U-4FXO-K9 and I have a couple of questions.1: Do the user licenses that the unit comes with cover everything that is needed to register a phone or does the phone itself also need a license as well? I as...
Forum Posts
Resolved! SPA922-SPA942 Localisation -> Dutch
How can I change the language displayed on my ip phones. Setup - 18 Language doesn't do anything.I need to set the phones from english language menus to dutch.Where can I find language files...Johan
as stated rented place got uc520-16 but non light by antean light up the wifi box is working connets to computer and if i run a lan line to back to one of my 6 printers they work but need get box working to supply the wall plugs
Hello!I'm struggling to properly enter the correct information into the SPA112 web interface to connect to Twilio.I'm new to voice systems, please keep that in mind when replying Precursory context on my setup:I purchased a Cisco SPA112 ATA to connec...
I bought a Cisco VoIP lab that came with two 7945 phones. I then bought an additional lot of six more 7945 phones. The first two and four of the second six all work with no problems. However, two of the additional six fail when downloading the fir...
HiA customer has the issue, that incoming calls gets signalled but canceled after the handset ist liftet. SIP provider says, that the UC320 is configured with 30ms as ptime in the SDP header and ask for modifying this value to 20 ms.Any chance this c...
Resolved! ATA Hotline Dialplan toll free number
I'm trying to setup a dialplan in a Cisco ATA192. It needs to auto-magically dial a 1-888 number when the handset it picked up. I can get it to dial my own cell phone (10 digital number) without issue. But for some reason when I put the 1888 number i...
We are looking to bring a UC 500 into service for a small office. It has never been used, so I am not sure if the IOS even, but I went to classes back in 2010. Is this device usable can I bring it online as a usable processor for my small office?
Hello, we setup IVR using CUC and CUCM with call handler, when someone call 12000, the bot start talking and when they press number 1, they will redirected to 12769, but on 12769 phone it shows VoiceMail with the number of (12601). I want the real nu...
Dear all, I am new to this community and would like to introduce myself. I am Peter from Holland and the proud over of a TT60-16. I got this Cisco TT60-16 with remote control (CTS-CTRL-DV8) at an auction of a previous employer when they closed a si...
I have a DoorKing 1812 gate controller that can answer and place calls and interact with the caller via DTMF tones. I am switching it over from POTS to this ATA but things are not working correctly. The SPA112 works with a normal phone, but not wit...
Hi everyone.I'm in troubles with SPA 122/112 provisioning with TFTP/TR069.On first step, we put a .cfg file with a default configuration with a tftp server.After this, SPA 1X2, connects with tr069 server and, depending on the wan IP address, we want ...
I would like to configure one Line key to blind transfer a call to a specific internal phone.Is this string correct? Thank you!fnc=bxfer;ext=**622@$PROXY;vid=1;nme=ergastirio
If an external call is transferred to another internal phone with xfer or bxfer, I can see only the number of the internal phone (eg **621) that forwards the call and not the number of the external call. Is it possible to show also the number of the ...
Hello,I need guidance with SPA3102.Line 1 is connected to a SIP trunk and I can make calls (outbound) from the analog telephone (ATA)PSTN Line is also connected to the same SIP trunk, and I need to receive calls (incoming) from the trunk number to th...