03-19-2009
05:45 AM
- last edited on
03-25-2019
10:34 PM
by
ciscomoderator
Hello
This is really a probably a daft question but how to you enable the night-service manually from a night-service phone. If it just a point of pressing * then the night-service code?
Many Thanks
Stuart
03-19-2009 07:03 AM
This is possible through the "night-service code" command under "telephony-service". More information on:
Thanks,
Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc.
03-19-2009 07:18 AM
when the code is entered we just get a "Unknown Number" message.
03-19-2009 08:24 AM
Did you enable this feature via CCA or through CLI? If through CLI you may have missed something in your configuration, please either thoroughly review the document Marcos referenced or attach a show run (edit out any personal or private data before posting here) and we can look through it to see if anything is missing.
03-19-2009 08:44 AM
It was done via the CLI - Night Service should be able to be manually activated from Ext 201.
max-ephones 14
max-dn 56
ip source-address 10.1.1.1 port 2000
max-redirect 20
auto assign 10 to 19
auto assign 5 to 8 type anl
calling-number initiator
service phone videoCapability 1
service dnis overlay
service dnis dir-lookup
timeouts interdigit 5
system message
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
cnf-file location flash:
network-locale GB
time-zone 21
time-format 24
date-format dd-mm-yy
voicemail 444
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
multicast moh 239.10.16.16 port 2000
web admin system name secret 5
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
transfer-pattern .T
secondary-dialtone 9
night-service code *445
night-service weekday 17:00 07:30
night-service day Sun 00:00 23:59
night-service day Sat 00:00 23:59
create cnf-files version-stamp 7960 Mar 16 2009 07:52:57
!
!
ephone-template 1
softkeys idle Redial Gpickup Cfwdall Dnd Join ConfList
!
!
ephone-template 15
button-layout 7931 2
!
!
ephone-template 20
softkeys idle Redial Gpickup Cfwdall Dnd Join ConfList
!
!
ephone-dn 2
number 5555
name TA Page
paging
paging group 1
!
!
ephone-dn 4
!
!
ephone-dn 5 dual-line
number 301 no-reg primary
label 301
description PhoneA Analog
name PhoneA Analog
call-forward busy 250
call-forward noan 250 timeout 10
huntstop channel
no huntstop
!
!
ephone-dn 6 dual-line
number 302 no-reg primary
label 302
description PhoneB Analog
name PhoneB Analog
preference 6
call-forward busy 250
call-forward noan 250 timeout 10
huntstop channel
no huntstop
!
!
ephone-dn 7 dual-line
number 303 no-reg primary
label 303
description PhoneC Analog
name PhoneC Analog
call-forward busy 250
call-forward noan 250 timeout 10
!
!
ephone-dn 8 dual-line
number 304 no-reg primary
label 304
description PhoneD Analog
name PhoneD Analog
call-forward busy 250
call-forward noan 250 timeout 10
!
!
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
!
!
ephone-dn 10 dual-line
number 201 no-reg primary
pickup-group 1
label 201
description
name
!
!
ephone-dn 11 dual-line
number 202 no-reg primary
pickup-group 1
label 202
description
name
!
!
ephone-dn 12 dual-line
number 203 no-reg primary
pickup-group 1
label 203
description
name
!
!
ephone-dn 13 dual-line
number 204 no-reg primary
pickup-group 1
label 204
description
name
!
!
ephone-dn 14 dual-line
number 205 no-reg primary
pickup-group 1
label 205
description
name
!
!
ephone-dn 15 dual-line
number 206 no-reg primary
pickup-group 1
label 211
description
name
!
!
ephone-dn 16 dual-line
number 207 no-reg primary
pickup-group 1
label 207
description
name
!
!
ephone-dn 17 dual-line
number 208 no-reg primary
label 208
description 208
name 208
!
!
ephone-dn 18 dual-line
number 209 no-reg primary
label 209
description 209
name 209
!
!
ephone-dn 19 dual-line
number 210 no-reg primary
label 210
description 210
name 210
!
!
ephone-dn 30 dual-line
number 1000 no-reg primary
call-forward night-service 201
huntstop channel
no huntstop
night-service bell
!
!
ephone-dn 31 dual-line
number 1000 no-reg primary
preference 1
call-forward night-service 201
huntstop channel
no huntstop
night-service bell
!
!
ephone-dn 32 dual-line
number 1000 no-reg primary
preference 2
call-forward night-service 201
huntstop channel
no huntstop
night-service bell
!
!
ephone-dn 33 dual-line
number 1000 no-reg primary
preference 3
call-forward night-service 201
huntstop channel
no huntstop
night-service bell
!
!
ephone-dn 34 dual-line
number 1000 no-reg primary
preference 4
call-forward night-service 201
huntstop channel
no huntstop
night-service bell
!
!
ephone-dn 35 dual-line
number 1000 no-reg primary
preference 5
call-forward night-service 201
huntstop channel
no huntstop
night-service bell
!
!
ephone-dn 36 dual-line
number 1000 no-reg primary
preference 6
call-forward night-service 201
night-service bell
!
!
ephone-dn 37 dual-line
!
!
ephone-dn 55
number A801... no-reg primary
mwi off
!
!
ephone-dn 56
number A800... no-reg primary
mwi on
!
!
ephone 1
device-security-mode none
mac-address B8FA.F294.0000
username "analogue1" password
type anl
button 1:5
!
!
!
ephone 2
device-security-mode none
mac-address B8FA.F294.0001
username "analogue2" password
type anl
button 1:6
!
!
!
ephone 3
device-security-mode none
mac-address B8FA.F294.0002
username "analogue3" password
type anl
button 1:7
!
!
!
ephone 4
device-security-mode none
mac-address B8FA.F294.0003
username "anagloue4" password
type anl
button 1:8
!
!
!
ephone 5
device-security-mode none
video
mac-address 0021.1BFC.8819
username "" password
paging-dn 1
type 521G
button 1o10,30,31,32,33,34,35,36
!
!
!
ephone 6
device-security-mode none
video
mac-address 0021.1BFC.8838
username "" password
paging-dn 1
type 521G
button 1o12,30,31,32,33,34,35,36
!
!
!
ephone 7
device-security-mode none
video
mac-address 0021.1BFC.8832
username "" password
paging-dn 1
type 521G
button 1o13,30,31,32,33,34,35,36
!
!
!
ephone 8
device-security-mode none
video
mac-address 0021.1BFC.8811
username "" password
paging-dn 1
type 521G
button 1o11,30,31,32,33,34,35,36
!
!
!
ephone 9
device-security-mode none
video
mac-address 0021.1BFC.8833
username "" password
paging-dn 1
type 521G
button 1o14,30,31,32,33,34,35,36
!
!
!
ephone 10
device-security-mode none
video
mac-address 0021.1BFC.8836
ephone-template 1
username "" password
paging-dn 1
type 521G
button 1o15,30,31,32,33,34,35,36
!
!
!
ephone 11
device-security-mode none
video
mac-address 0021.1BFC.8831
username "" password
paging-dn 1
type 521G
button 1o16,30,31,32,33,34,35,36
!
!
banner login ^CCisco Configuration Assistant. Version: 1.9 (1). Mon Mar 09 10:23:47 GMT 2009^C
!
line con 0
password 1nv3nt8s
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 5 100
!
ntp master
03-19-2009 09:26 AM
None of your extensions have night service on them. From the doc Marcos linked to:
Step 12
ephone-dn dn-tag Example: Router(config)# ephone-dn 55
Enters ephone-dn configuration mode to define an ephone-dn to receive night-service treatment.
Step 13
night-service bell Example: Router(config-ephone-dn)# night-service bell
Marks this ephone-dn for night-service treatment.
Try setting this up on your ephone-dn 10 and try from that extension again.
03-19-2009 07:51 PM
Question on the behavior of this manual enable. When you enable from a night service extension with the night-service code. This enables night-service on the extension until it is a\ manually disabled, or b\ the night-service time brings it back into 'day'
cheers
geoff
03-24-2009 07:51 AM
That is correct, except that as of Cisco CME 3.3 night service is no longer enabled JUST for the extension dialing the code, it is enabled system wide.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide