11-03-2009 01:00 PM - edited 03-21-2019 01:44 AM
Hi,
I did a password reset to my UC-500 router and after that I am unable to connect to Configuration assistant. When I connect my PC to the ethernet port I am unable to get automatic IP. Tried to assign the ip 192.168.10.x but still unable to connect using the ip 192.168.10.1
Can anybody suggest how can I use Cisco Configuration assistant to manage UC-500
Thanks
11-03-2009 01:02 PM
Did you set the config-register back to 0x2102?
Can you post a running config?
Can you post a show ver?
11-03-2009 01:23 PM
Yes. I have set it back to 0x2102.
This is the config I have followed
Power on the router
send break signal
confreg 0x2142
reset
en
enable password xxxx
enable secret xxxx
confreg 0x2102
end
write
after this when i reboot the router it asks for username and password
what will be the username and password ? I have tried giving the username cisco and password which I have set in the above steps.
Please suggest.
11-03-2009 01:44 PM
In middle forgot to mention copy start run
11-03-2009 03:54 PM
I would need to see the startup config to tell you what the username might be. If you can post that I can help.
Other wise, you could copy the factory default config from the flash (if it is still there) to the startup config. That will default it to the current settings.
If you don't want the default settings, you could do this...
Power on the router
send break signal
confreg 0x2142
reset
en
copy start run
enable password xxxx
enable secret xxxx
username cisco priviledge 15 secret cisco
confreg 0x2102
end
wr
That should get you in with cisco/cisco.
11-03-2009 06:16 PM
This is the running-config
Current configuration : 1263 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
!
!
!
ip cef
!
!
!
!
!
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
no dspfarm
!
!
!
archive
log config
hidekeys
!
!
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface Integrated-Service-Engine0/0
no ip address
shutdown
!
interface FastEthernet0/1/0
!
interface FastEthernet0/1/1
!
interface FastEthernet0/1/2
!
interface FastEthernet0/1/3
!
interface FastEthernet0/1/4
!
interface FastEthernet0/1/5
!
interface FastEthernet0/1/6
!
interface FastEthernet0/1/7
!
interface FastEthernet0/1/8
!
interface Vlan1
no ip address
!
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
voice-port 0/0/0
!
voice-port 0/0/1
!
voice-port 0/0/2
!
voice-port 0/0/3
!
voice-port 0/1/0
!
voice-port 0/1/1
!
voice-port 0/1/2
!
voice-port 0/1/3
!
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control
description Music On Hold Port
!
!
!
!
!
!
line con 0
no modem enable
line aux 0
line 2
line vty 0 4
login
!
!
webvpn cef
end
The sh version is
Nov 3 21:43:58.711: %SYS-5-CONFIG_I: Configured from console by console
Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(11)XW6, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Feb-08 02:24 by prod_rel_team
ROM: System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1)
Router uptime is 1 minute
System returned to ROM by reload at 03:12:03 BST Wed Nov 4 2009
System image file is "flash:uc500-advipservicesk9-mz.124-11.XW6"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco UC520-16U-4FXO-K9 (MPC8358) processor (revision 0x202) with 249856K/12288K bytes of memory.
Processor board ID FTX1220Y1KG
MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0x20
22 User Licenses
10 FastEthernet interfaces
2 terminal lines
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Voice MoH interface
1 cisco service engine(s)
128K bytes of non-volatile configuration memory.
125440K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide