10-12-2012 11:16 AM - edited 03-21-2019 09:53 AM
Hello guys,
I am currently having difficulty in registering ATA187 in CME 9.1. I recently upgraded to 9.1 as it is mentioned inhttp://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme91spc.html
that CME 9.1 supports ATA187. It is said that the SIP firmware is supported, but I searched the SIP firmware for ATA187 in the Cisco website and found nothig
Any help will be appreciated.
Solved! Go to Solution.
10-14-2012 09:48 AM
Actually you asked about SIP firmware location, the answer is all firmware is SIP.
Al devices ships loaded with firmware. Sometime, it may be necessary to update it.
10-14-2012 08:50 AM
ATA187 only supports SIP. It does not supports SCCP.
10-14-2012 08:59 AM
Yes, that I understand (I already mentioned it in my question). However I cannot find any ATA187 SIP firmware in the Cisco website. Or is it already embedded in the ATA hardware?
10-14-2012 09:48 AM
Actually you asked about SIP firmware location, the answer is all firmware is SIP.
Al devices ships loaded with firmware. Sometime, it may be necessary to update it.
10-14-2012 08:57 PM
Thanks Paolo for the information. I have successfully registered the ATA187 by creating SIP endpoints.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide