10-20-2009 08:16 AM - edited 03-21-2019 01:40 AM
it's posible upload custom ringtones to SPA9X2 using a TFTP server?? (i.e. without using the ringtone utility)
10-22-2009 07:43 AM
Yes there is and that link is here:
https://supportforums.cisco.com/docs/DOC-9944
and here is how to load them.
https://supportforums.cisco.com/docs/DOC-9572
Bill
10-22-2009 12:55 PM
What about uploading ringtones using http or https? Since that is a supported provisioning method it would make sense for us to be able to use it for ring tones as well. If I have 75 phones at a remote customer site TFTP is pretty useless for me.
11-02-2009 11:26 AM
thanks for your answer but I need to find how to upload massively a ringtone to the phone. Actually we have at least 300 Linksys Phone SPA9X2 in our company and all of them are provisionned remotely by config files (SPA$MAC.cfg) and TFTP Server. By this way, if the phone have some trouble or disfunction, we only do a factory default reset and the phone download again the configuration. I like that the ringtones can be dowloaded automatically after a factory reset. Is that Possible??
Thanks
11-03-2009 04:21 AM
These phones were designed for a SMALL business of less than 20 users. The amount of time it would take to do 16 phones (the max allowed by the SPA9000) would not be long since they are all on the same network. In the config tool, you just input the ip address of the local phone, and it does the rest. The target market for these phones was no where near the 300 number.
I'm sorry but they do not support such upload capabilities.
Bill
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide