03-26-2013 05:23 PM - edited 03-21-2019 07:10 AM
I have a remote location that have an analog line that I need to be able to dial out from the UC560.
So If I am calling 911 I want my call to getout at this analog line locate in a different place.
We are sharing our UC560 in two different building and calling 911 make information show from the other building. Our phone companie can provide E911 to overcome this, but it is really costly.
I was looking for some FXS connector to share the POTS line back to my UC560.
Thank
Sylvain Duchesne
03-27-2013 01:56 AM
You can add a VIC2-2FXO card in the UC500 free slot.
03-27-2013 05:30 AM
Dear Paolo, keep in mind that this POTS is locate in a separate building only link with IP (with a WiFi bridge).
I have found this device ; http://www.voiplink.com/Zoom_5801_p/zoom-5801.htm that SHOULD be compatible with the UC560.
thank
Sylvain
03-27-2013 07:02 AM
You should look also at the FXO adapters from the Cisco small business line of products.
04-01-2013 08:41 PM
Hello PAolo, do you have a part number... the only thing I found is from Linksys division.
Thank
Sylvain
04-02-2013 03:33 AM
You can use those as well. Otherwise look for one with FXO port.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide