01-22-2012 11:38 PM - edited 03-21-2019 09:41 AM
I have some problem to set the password and the time server with the SPA112.
Does anybody knows how to set them in the in the .xml file.
My Example is:
<!-- Time SetUp-->
<Time_Setup>
<Time_Zone>+01 2 2</Time_Zone>
<Auto_Adjust_Clock>1</Auto_Adjust_Clock>
<Time_Server_Mode>auto</Time_Server_Mode>
<Time_Server/>swisstime.ethz.ch</Time_Server>
<Resync_Timer>3600</Resync_Timer>
<Auto_Recovery_System_Time>0</Auto_Recovery_System_Time>
<Time_Mode>1</Time_Mode>
</Time_Setup>
<!-- Time SetUp-->
<!-- Password-->
<Web_Login_Admin_Name>admin</Web_Login_Admin_Name>
<Web_Login_Admin_Password>1234</Web_Login_Admin_Password>
<Web_Login_Guest_Name>cisco</Web_Login_Guest_Name>
<Web_Login_Guest_Password>1234</Web_Login_Guest_Password>
<!-- Password-->
Does anybody know the right strings ?
Thanks for Help
Chris
01-24-2012 01:29 PM
I don't see anything obvious wrong with the password config.
But the time server should be 'manual' not 'auto' since you want to name your time server.
And the timer server xml, has the extra / in the first bracket before your swisstime.ethz.ch, that shouldn't be there.
02-06-2012 03:32 AM
Thanks for you Answer.
But sorry nothing helps
The Password Section changes nothing on my device.
The Password is still the same, the default password.
Also the settings for the tomne Server
No value changes.
Did you have an other idea ?
The part with the provisioning, regional and the syslog server work perfect like with the over 200 PAP2t that we have by our customers.
Thanks for Help
Chris
02-06-2012 10:22 AM
Hi Chris,
Thanks for letting us know about this issue.
I've verified and confirmed your findings.
I've opened CDETS# CSCtx81100 against this and have also notified the device's product manager.
Regards,
Patrick
----------
02-07-2012 05:13 AM
Hello Patrick
Thanks for your Help.
The Problem with the Password is fixed now, with the ^configuration Like these it works fine.
Buit the Problem with the NTP Server is still here.
Here is my Config for the Password:
Regards Chris
02-07-2012 08:56 AM
I assume you corrected the errors that I pointed out earlier for the time config. Also, it needs to be within the router-configuration like what you did for the password.
02-07-2012 09:26 AM
Hi Chris,
I'm glad you figured out the password syntax. As Nelson pointed out, the time syntax is similar. For completeness, here's the config I tested with success:
Regards,
Patrick
----------
09-17-2012 02:30 PM
Hi Christoph Here you have to follow some steps to change your default password
http://www.callcentric.com/support/device/cisco/spa112-spa122
If this answer was satisfactory for you, please mark the question as Answered.
Thank you
11-09-2012 11:59 AM
Where is the NTP setup in the web GUI?
It used to be in the System tab, and used the time zone and DST settings in the Regional Tab.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide