03-01-2010 02:31 PM - edited 03-21-2019 02:14 AM
Hi,
First, excuse me for my bad english, i do my best.
I try to make my SPA502G in French, i install a tftp server and it work well, but SPA502G still in english.
I use this command: serv=tftp://<tftp_server_addr>/;d0=English-US;x0=spa525_EN_7_2_5.xml;d1=French;x1=spa525_FR_7_2_5.xml;
The tftp server upload the file to the SPA502G, no error in tftp server, but always in english.
All my SPA502G have the latest firmware 7.4.3 but the dictionary is 7.2.5, Problem between version????
Please help me!!
Thank you
03-09-2010 08:15 AM
Dear Sir;
The issue is that you are using the wrong dictionaries. For SPA50X phones, please use the SPA9XX dictionaries.
Regards;
Alberto
03-09-2010 08:36 AM
Hello,
It's OK one Cisco technician give me the dictionnary "frS_FR_v615.xml" and all work well now.
Thanks.
04-20-2010 11:56 PM
Hi,
I use the same parameters for SPA 502G.
Software version : 7.4.4
I did :
serv=tftp://TFTP_IP_ADDRESS/;d0=English;x0=enS_US_v615.xml;d1=French;x1=frS_FR_v615. xml
On the TFTP logs (Linux server) , i have this :
Apr 21 08:53:50 TFTP_IP_ADDRESS in.tftpd[25204]: RRQ from TELEPHON_IP_ADDRESS filename enS_US_v615.xml
Apr 21 08:53:51 TFTP_IP_ADDRESS in.tftpd[12192]: RRQ from TELEPHON_IP_ADDRESS filename frS_FR_v615. xml
But when i setup French as language on the IP telephon, it stays in English.
Have you some ideas?
Regards
Philippe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide