05-19-2011 03:28 AM - edited 03-21-2019 04:06 AM
Good morning,
When I try to provision a new dictionary in my cisco spa504g'm not able.
Configure the following,
Regional --> Dictionary Server Script:
but when you restart the phone it does not change the language.
Can anyone help?
My firmware version is 7.4.8a
Thanks
05-19-2011 08:45 AM
Hi Julio,
First thing is that when you use any other language than English you still always have to provide the phone with the original English dictionary XML and you should reflect it in the dictionary server script.
In your code the problem is that you try to load the Spanish file for the first, English language. So the corrected script would look like this:
serv=tftp://192.168.0.171/;d0=English;x0=spa50x_30x_en_v745_2.xml;d1=Spanish;x1=spa50x_30x_es_v745_2.xml
Second thing is that you are using FW v7.4.8 and your XMl files are for FW v7.4.5 which may work but surely you'll experience untranslated strings.
FW and XML versions should always match.
Hope this helps, please let me know how it goes and wheather you need further help.
Thanks and regards,
Zsolt
05-19-2011 11:18 PM
Hi,
I change the script line, but don´t work.
Where can i find V7.4.8 translate files
Thanks,
10-07-2012 02:49 PM
Good day Zsolt Benko.
I have a CISCO 504G with the last firmware (7.5.3). I know two ways to provisioned this phone, manually and via TFTP, but now I want to load the spanish language.
In your Julio's answer, you told about "always have to provide the phone with the original English dictionary XML and you should reflect it in the dictionary server script." but I dont know how to make it.
Only with TFTP provision can i do this, right?? or could I do it with a manually provision?
Please help me.
I did download the language files on this page http://www.avanzada7.com/es/productos/telefonos-ip_sobremesa/cisco-spa504g..
Do you have an example to the load code off Language Dictionary ?
Thank you.
10-24-2012 07:20 AM
Hi everybody.
Please, only give me the first step... and I will go on with the next work...
I appreciate your help.
Eric Alarcón.
11-21-2012 06:12 AM
Hi everybody.
Finally I could change the menu language in my laboratory. I had an error in mi server script, the correct format is put all the line:
serv=tftp://190.60.192.195/;d0=English;x0=spa50x_30x_en_v746.xml;d1=Spanish;x1=spa50x_30x_es_v746.xml
Good Day.
02-27-2014 12:52 AM
Dear Zsolt Benko,
I have a question. You wirtten that "FW and XML versions should always match". Now I have spa504g firmware 7.5.5 but in
this page
https://supportforums.cisco.com/docs/DOC-9923/#SPA_Phone_Localization_dictionaries
there are dictionaries updated to 7.4.9 version. Can I use them with fm 7.5.5 without trouble?
Thank you in advance.
02-27-2014 01:18 AM
Just download dictionaries for 7.5.5 on official Cisco's support site. It's lmost the same place as firmware itself.
If you will use 7.4.9 dictionaries on 7.5.5 firmware then some items will remain untranslated.
02-27-2014 03:34 AM
Please forgive me! I am stupid, but I am not able to find the official dicitionaries for 7.5.5 firmware.
This site it's too complex.
Could you be so kind and provide me the link please?
02-27-2014 10:33 AM
02-28-2014 02:59 AM
thank youuuu!!!
02-28-2014 10:01 AM
Glad to hear. Rate usefull advices ;-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide