03-18-2010 12:53 PM - edited 03-21-2019 02:19 AM
I have an spa525g with the spa500s sidecar. The sidecar buttons are working for direct dial and status, however when I try to do a blind transfer for a button the call fails. If I do a blind transfer and enter the 3 digit extension it works fine. So it seems to just be the sidecar buttons causing the problem.
Thanks
Mike
03-19-2010 04:46 PM
I spoke with the developer on this, he says this issue will be addressed in the next release which is scheduled to be out within a few weeks, thank you.
08-03-2010 09:13 AM
We are experiencing this issue with firmware 7.4.4. The SPA 50Xg series phones do not exhibit this behavior. Is there a projected time when the new software will be available.. we prefer the spa525g due to aesthetics, however, functionality will prevail...
08-03-2010 09:17 AM
New firmware for 50x and 525 should be available for download next week on cisco.com. Thank you.
08-18-2010 11:35 PM
The new firmware resolved the issue we were experiencing. Thank you!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide