12-06-2012 09:19 AM - edited 03-21-2019 06:42 AM
Can someone help me get the setup wizard thatbplays well with both of these? I downloaded he one in the software center but this one looks for an SPA 8000 and i do jot have one.
Thanks
Sent from Cisco Technical Support iPad App
Solved! Go to Solution.
12-06-2012 10:20 AM
Hi,
You can refer to this post below:
https://supportforums.cisco.com/docs/DOC-9876
Regards,
Tere.
If you find this post helpful, please rate!
12-06-2012 10:20 AM
Hi,
You can refer to this post below:
https://supportforums.cisco.com/docs/DOC-9876
Regards,
Tere.
If you find this post helpful, please rate!
12-06-2012 01:41 PM
Thanks for reply i already downloaded the program and ran it but now it connected successfully to the SPA400 but wont connect to the SPA9000. It tells me it needs a password though i can log into it via html with user Admin password (blank).
Any help?
Sent from Cisco Technical Support iPad App
12-06-2012 04:24 PM
I think the password is not mandatory, you can leave it blank and continue isn't it?
Regards,
Tere.
If you find this post helpful, please rate! :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide