Hi all, thanks for reading.
I have the SPA9000/SPA 400 combo with 7 x SPA504G phones. Voip is not issue, incoming/outgoing and line hunt config is fine and voicemail is working as it should.
My problem is not incoming pstn calls are terminating at the handsets. As a hunt group I have tried the following under Sip/PBX Parameters/Hunt Groups
400:name="PSTN",100,101,hunt=re;14;1,cfwd=vm1100
In Line 1 (SPA400) contact list I have tried the following with and without line hunt field above.
aa
100
100,cfwd=aa & 100,cfwd=vm1100
Line1:100,aa|Line2:100,aa|
Line1:100,101,hunt=re;14;1,cfwd=vm1100
Line2:100,101,hunt=re;14;1,cfwd=vm1100|Line2:100,101,hunt=re;14;1,cfwd=vm1100
I am using the same style dial plan & hunt group for Line 2 (sip trunk)
I ran a syslog on SPA400 which is attached to this post.
Thanks for the help
Michael