05-29-2010 02:24 PM - edited 03-21-2019 02:38 AM
Hi
1 SPA9000
3 SPA942
1 WIP310
Call pickup does not work.
If you try to do a call pickup the phone displays "gathering call info" and nothing happens.
Any quick setting that must be on or off somewhere for this to work ?
Thanks
06-01-2010 03:35 AM
Dear Sir;
Did you upgrade to latest fw? Make sure (on phones web UI) you have the parameter Linksys Key System (on SIP tab) set to Yes.
Regards
Alberto
06-01-2010 05:41 AM
Hello
Yes, all the phones and PBX have the latest available firmware.
Yes Linksys Key System set to YES on all phones.
It used to work
I've already reseted all the phones and PBX to factory defaults and reprogramed all units, but this particular function does not work (also group pickup does not work - as these functions must be related i think)
06-02-2010 09:46 AM
Ummm...this is very strange.
Try taking a look at the phones and the SPA9000 regional settings to make sure call pickup star codes matches in both devices. Check also on the user settings that call pickup is enabled. If still fails, I would need to see a trace between the phones and the PBX.
Regards
Alberto
06-08-2010 01:39 AM
Found the root of the problem
All phones had (under Ext 1 in this case) both "Use Outbound Proxy" and "Use OB Proxy in Dialog" turned ON
Changed all phones both settings to OFF and everithing is now (apparently) working.
Will do further testing and post the results here.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide