UC300 with CUCM 7

Rene Melendez Cabrera · ‎06-21-2011

Hello,

I have a CUCM 7 in my Data Center and I have several Branches with a few users (average 8 phones), I watched the UC300 is cheap and can to support a few users.

Can anybody tell me if the UC300 can to work with my CUCM 7 to do calls through the WAN?

Thanks a lot,

David Trad · ‎06-21-2011

Hi Rene,

I believe the answer for this to be "NO" at this point in time.

I am however a strong advocate of the UC-320W supporting SIP trunk Interconnection capabilities between sites, this way it could work with a Call Manager or a Call Manager Express system (The latter two mainly using H.323 but can use SIP), and in the ultimate method, multiple UC-320's talking to each other.

But right now it is a stand alone unit.

Cheers,

David.

Cheers, David Trad. **When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) *

nalbert · ‎06-23-2011

Rene,

David is correct. There is no integration with CCM or SRST in UC320. However you could create a plain old SIP trunk to CCM if you woud like that.