08-26-2009 08:01 AM - edited 03-21-2019 01:27 AM
? how to extend the antenna built into the uc520? i,e. RP-TNC (ReversePolarity-Threaded Neill-Concelman) extension cable..
what cable spec / authority / for:
RG (Radio Grade) coaxial cable.
50' extension, male to female RP-TNC connectors.
08-31-2009 09:05 AM
Hi, you can hook up any RPTNC coax extension cable to attach to a remote antenna. Any of the: AIR-CABxxxLL-R listed below will work.
HTH,
Saurabh
Cisco Part Number
Type of Cable
Description
Loss at 2.4 GHz
Loss at 5.8 GHz
AIR-CAB005LL-N
Interconnect
5-ft low loss cable, one straight N connector, one 90-degree N connector
0.5 dB
0.8 dB
AIR-CAB005LL-R
5-ft low loss cable, one RP-TNC plug, one RP-TNC jack
AIR-CAB010LL-N
10-ft low loss cable, one straight N connector, one 90-degree N connector
0.9 dB
1.5 dB
AIR-CAB020LL-R
20-ft low loss cable, one RP-TNC plug, one RP-TNC jack
1.3 dB
2.5 dB
AIR-CAB050LL-R
50-ft low loss cable, one RP-TNC plug, one RP-TNC jack
3.4 dB
5.75 dB
AIR-CAB100ULL-R
100-ft ultra low loss cable, one RP-TNC plug, one RP-TNC jack
4.4 dB
7.25 dB
AIR-CAB150ULL-R
150-ft ultra low loss cable, one RP-TNC plug, one RP-TNC jack
6.6 dB
11 dB
AIR-ACC2537-060
Bulkhead Extender
5-ft (60 inches) RG-58 type cable with one RP-TNC plug and one RP-TNC jack
2 dB
3 dB
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community