UC520 SIP Incoming OK Outgoing Fail

[lritchie1979]

Hi I've a UC520 and im tring to connect to a Voip Supplier "Engin"

it is regestering

and i can recieve calls but i cannot make any calls

the debug logs shows disconnect (47) "No Resouces"

i'm complealy stumped

i've attached a copy of the incoming and outgoing log and a show tech

Thanks

Leslie

[Alexander Maroukian]

Hello Leslie,

I would try to remove the keepalive target and the keepalive time and re register with the SIP provider.

under sip-ua:

no keepalive taget

no timers keepalive

HTH,

Alex

*Please rate helpful posts

[lritchie1979]

Found the outgoing SIP calls where not being resolved though DNS properly

it looks like it has resolved correctly in the log 

003450: Mar  5 06:02:59.103: //-1/xxxxxxxxxxxx/SIP/Info/sip_dns_type_srv_query: IP Address of vic-vsbc.byo.engin.com.au is:

003451: Mar  5 06:02:59.103: //-1/xxxxxxxxxxxx/SIP/Info/sip_dns_type_srv_query: 203.161.164.69

but we had to change 

outbound-proxy dns:byo.engin.com.au

to

outbound-proxy ipv4:203.161.164.69:5060