Case A - virgin (unconfigured) device is booting. It asks DHCP server for configuration. Not mentioning others, it request NTP server and time offset options. DHCP server respond to such request. Phone got time from NTP server and display them. Unfor...
I bought 3 spa 303 cisco phones and I am about to config them to be used with my existing 3Cx IPPBX. but the phone comes with the current IP 0.0.0.0. and I am seeing no way to change with that I can assing it an Ip address on my network in order to a...
HelloI have a Cisco UC560-T1E1-K9, which is licensed for 24 phones, this device supports up to 138 IP phones, but I have to buy a license.My question is I can lock with 138 SIP phones without buying a license???.My phones are SPA303.
I just discovered this issue on a new install today... there is already a router/vpn setup that the UC320 has to be behind... there is no changing any of that...I saw one post where the guy changed the WAN port to STATIC IP and actually connected it ...
HelloIs it possible to show callerid while active blf (before call pickup)?I have some spa303 connected to asterisk.I haven't found such thing on the phone. Did I missed it?I have tried to find another solution. I can trigger xml application with Cis...
Hi Expert! I'm running CUCM 9.0. I have Software Conference Bridge build-in which are added to MRG->MRGL-Device pool and Phones. My Region has been set to G.711. All IP Phones and Conference Bridges are associated with the same Device pool. I just n...
My UC560 is not in production just yet and one thing I wanted to figure out before we go live is speech to text. My understanding is that Exchange is capable of doing this through Unified Messaging. However, I really don't want our Exchange 2010 to d...
Someone can tell me if does the 7925G IP phone is supported by the UC540?if it is so, the second question would be what kind of license do I need or what would be the part number as I apply the 7925G phone?I welcome your comments.Thank you.
Hi,first of all sorry for my english I have 2 gsm interface(inside there is a sim of mobilephone) connected with uc500 by normal cable rj41. the first interface works properly and show me the number of phone of people who calls me, the second one doe...
Hi, is there a way to change the VLAN port on the WAN port of the UC560?I'm trying to use VLAN50 on WAN port and I'd like to have that setup in the network configuration o the UC560. Is there a way to do this?Thanks in advance!Jason
I have a Cisco UC320W and using with Vitelity as my sip provider.Every thing had been working up to this weekend.Now I am not rev=cieving any incoming calls and when I look at my SIP logs they show my provider IP being blocked.Any ideas? Below is pa...
I can't quite figure out the best way to make this work.We have a 1-800 number that needs to forward directly to an internal extension during business hours. At night it then needs to forward to an external number. The whole process needs to be autom...
Hi all.I have a trouble with CID(caller ID) forward from PSTN to VoIP. I see CID in web UI, but in SIP Invite package CID seems like CalledID.How can I fix it?In web I enable "PSTN CID For VoIP CID:" checkbox.
I'm working with a client on BE3000 install and I've a few questions about the Auto Attendant. First, how do I call into it? It has the same number as voicemail so every time I call in I get VM instead.Is there a way to have an option that only pla...
Dear Sir/Ma,please kindly send me the BoM/part numbers for the below: 1 X Cisco Unified Communications 540 with 32 user licenses for UC and integrated messaging, 4 FXO ports, 4 FXS ports, 8 PoE 10/100 ports, integrated wireless, E1 port for ISDN/P...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: