Hello,
I have two offices with uc540 in both and Multisite working "8+ ID + extension" ( using a wireless conecction )
At this moment, each uc540 has own PTSN lines and if I would like to make a phone call, I press 9 and phone number to make outgoing calls.
Site A: wan 192.168.5.33
vlan1: 192.168.10.1
vlan100: 10.1.1.1
ID: 1
Site B: wan 192.168.5.32
vlan1: 192.168.1.1
vlan100: 10.1.1.1
ID:2
Now I would like to use PTSN lines of site A from site B ( dont use PTSN lines of site B ).
As far I known, I need to create a dial-peers but I nor sure how to do it.
Site B:
dial-peer voice 619 voip
destination-pattern 619.........
session target ipv4:192.168.10.1
codec ug711ulaw
end
Site A:
dial-peer voice 619 pots
destination-pattern 619.........
port 0/1/0
end
But If I call 619222333444 (for example), it doesnt work.
Any advice.
Thanks.
