10-30-2012 04:20 AM - edited 03-21-2019 06:30 AM
Hi, i have a client who has boght as UC540, the FXO type. Meanwile they decided to go to an ISDN line. I've installed the BRI card and reconfigure all with the new config. Everyting is working well execct when the hangup the call. It takes to long to disconnect. If i trie to make another call after i finish one, it takes about 5 to 10 seconds before i can attempt to do a new one. Is this normal ? Is there a way i can make things go faster ?
Best regards
Paulo Silva
Solved! Go to Solution.
10-30-2012 05:14 AM
Have 'isdn tei-negotiation preserve" under BRI interface.
Post 'debug isdn q931' taken with 'term mon'.
10-30-2012 05:14 AM
Have 'isdn tei-negotiation preserve" under BRI interface.
Post 'debug isdn q931' taken with 'term mon'.
10-30-2012 08:21 AM
Hello, i've done as you said and problem is gone, I believe now that when the call was hanged ISDN had to renotiate tei, by adding the command you gave it preserves that negotiation making thing go much more faster.
Thanks
Paulo Silva
10-30-2012 08:37 AM
Yes.
Thank you for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide