03-25-2013 07:29 AM - edited 03-21-2019 07:09 AM
Hi I have a UC560 and the client is looking to add 10 additional phones and also wants to integrate paging into their current Crestron system.
They require a 12V signal and of course the audio.
Currently the phones are set to page via Paging Groups, can an external amp be used with an existing paging group?
If we need to purchase additional hardware that isn't a problem, I just don'tknow what we would need.
Any help would be very much appreciated.
Thanks
03-25-2013 10:41 PM
There are a few good threads on this subject already, have you tried searching ?
03-26-2013 08:59 AM
I have looked and researched but I cannot find any specifics especially regarding 12V. I am not very familiar with external paging on the UC, the external ringers I have installed in the past run in line with the incoming lines and I haven't used FXO/FXS ports for external paging. Any help would be very much appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide