12-01-2011 07:32 AM - edited 03-21-2019 05:01 AM
Hi Thre,
We have a UC560 that the admin logon to the unit, through CCA and Telnet doesnt work for the CUE web interfae.
How do I reset the CUE web interface admin password?
Thanks
Graeme
Solved! Go to Solution.
12-09-2011 08:48 AM
To reset the CUE-GUI pin.
In CLI, access the CUE. (int ser 0/0 session)
log in with your privilage 15 username/password (default is cisco/cisco)
in the exec mode (if username is cisco)
type
username cisco password cisco
This will change the password to cisco.
12-06-2011 01:36 AM
FIxed it
Some how someone had set the default password to Password1 for the admin account,
Thats now been changed and the trainees have been slapped
12-09-2011 08:48 AM
To reset the CUE-GUI pin.
In CLI, access the CUE. (int ser 0/0 session)
log in with your privilage 15 username/password (default is cisco/cisco)
in the exec mode (if username is cisco)
type
username cisco password cisco
This will change the password to cisco.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide