08-17-2010 01:03 PM - edited 03-21-2019 02:53 AM
Hello,
I am currently planning a UC560 deployment with PRI. The provider is speakeasy and the speakeasy customer premise equipment is an Adtran Total Access 916. I was wondering what I need to do to get the PRI to work with UC560, any configurations and how?
Thanx,
Solved! Go to Solution.
08-17-2010 06:44 PM
You will need a T1 card for your UC560 if it doesnt have one already.
On the line side you will need to know the following:
Framing - SF or ESF (ESF is most common)
Line Code - AMI or B8ZS (B8ZS is most common)
ISDN switch type
time-slot assignments
Using CCA makes it a really easy process.
https://supportforums.cisco.com/docs/DOC-9772
https://supportforums.cisco.com/docs/DOC-9646/
Cole
08-17-2010 01:13 PM
Hello,
I am currently planning a UC560 deployment with PRI. The provider is speakeasy and the speakeasy customer premise equipment is an Adtran Total Access 916. I was wondering what I need to do to get the PRI to work with UC560, any details I need to request from the client, any special configurations and how?
Thanx,
08-17-2010 06:44 PM
You will need a T1 card for your UC560 if it doesnt have one already.
On the line side you will need to know the following:
Framing - SF or ESF (ESF is most common)
Line Code - AMI or B8ZS (B8ZS is most common)
ISDN switch type
time-slot assignments
Using CCA makes it a really easy process.
https://supportforums.cisco.com/docs/DOC-9772
https://supportforums.cisco.com/docs/DOC-9646/
Cole
08-18-2010 03:20 AM
Thanx, man. So I need to be on the safe side, I should communicate with the client to request these details from their T1/PRI provider so I know the definite options to apply, right?
08-18-2010 07:57 AM
You might want to get in touch with the carrier directly, but yes that's correct.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide