08-29-2009 04:06 PM - edited 03-21-2019 01:27 AM
Does someone know how to turn on vibrator (silent mode) on a WIP310? I looked in documentation and found nothing.
Thanks
08-31-2009 09:44 AM
Hi malaberge,
The only supported options are Ring on/off. I verified with the product manager.
Regards,
Patrick
-----------
08-31-2009 11:06 AM
Hi,
Thank you for the answer.
It's very bad from Cisco! To be sure I chatted with a Cisco product expert before buy the WIP310 and here is the transcription:
Chat Transcript |
info: Thank you for choosing Cisco. We will be with you shortly. info: You are now chatting with Limesh. Limesh: Thank you for choosing Cisco Systems. How may I assist you today? Limesh: Hi, Marc-Antoine Marc-Antoine: I'd like to know if the WIP310-G1 has the vibrator option? Limesh: I would be glad to assist you with that. Limesh: Let me check that for you. Please allow me a moment. Limesh: I am just gathering the information for you. Thank you for patiently waiting. Marc-Antoine: ok thanks Limesh: Marc-Antoine, WIP310-G1 provides Vibrator (silent mode) option. Marc-Antoine: Thank you for the information Limesh: Is there anything else I can help you with today? Marc-Antoine: No, thanks Limesh: you are welcome Limesh: If you have any issues you can get back to us, we would be glad to assist you. Limesh: Thank you for chatting with us. Please click the "Close" button at the bottom right to tell us about your experience. |
08-31-2009 11:38 AM
Hi malaberge,
I will let limesh, their manager, and Product Marketing know. Thank you for following up on this.
Regards,
Patrick
-----------
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide