06-03-2010 08:59 AM - edited 03-21-2019 02:39 AM
Is there a way to change the delay before the digits dissappear on an SPA525g. For instance if I start to dial a number so I dial 91510 and then get interuptted for a second the number disappears and I have to dial it from the beginning. It looks like it gives about 10 seconds to complete input of the number. We would like to up the timeout if possible.
06-03-2010 10:42 AM
Yes, you can change the interdigit timeout using the following CLI command:
router(config)#telephony-service
router(config-telephony)#timeouts interdigit 20
This would increase the interdigit timeout to 20 seconds (default is 10).
Hope this helps.
Brandon
03-29-2011 07:06 PM
I have changed both the short and long Interdigit Timeouts to 30 seconds each and it still times out in 10 seconds.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide