07-18-2004 01:48 PM - edited 02-21-2020 01:15 PM
Is it possible for a 2600 router to act as a VPN Server for Win2k and XP Clients using Microsoft's PPTP - MPPE built in protocol of windows?
Requirements:
No additional VPN module to buy!
No additional software to use on the clients site.
No authentication via TACACS or Radius
Thank you very much in advance
Anastasios Zafiropoulos
Greece
07-19-2004 08:34 PM
Hi
I have tried running Concentrator kinda function u can say in my 2691 it worked fine.
i have created local username/passwds and necessary isakmp,dynamic ipsec policies,ip pools .
remote hosts got connected using vpn client (1.x not sure tried b4 3 months).recd ips from ip pool and were able to work properly..
regds
prem
07-30-2004 06:04 AM
Hi,
What IOS did you use (FW?VPN?) in the 2600 router?
Can you do the authentication with Radius and Tacacs servers instead of local username and password?
ANy helps appreciated.
Thanks
Matteo
08-01-2004 07:59 PM
Hi
this is the IOS version which i hav tested..
If you have configured Radius or TACACS you would be able to use them for authentication but do remember to alter the configuration accrodingly.
ROM: C2600 Software (C2600-IK9O3S-M), Version 12.2(15)ZJ3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
IOS File Name :
System image file is "flash:c2600-ik9o3s-mz.122-15.ZJ3.bin"
regds
prem
08-02-2004 12:57 PM
Can you point me in the direction of a sample config for this? I'm lost in finding how to set up the IOS so that windows native client can connect into it successfully. I don't care as much about the authentication method, more the establishing the connection part.
Thanks!
08-03-2004 02:03 AM
hi ther
do chek this link which has enough links in it to assit u ...
http://www.cisco.com/en/US/products/sw/secursw/ps2308/prod_configuration_examples_list.html
regds
prem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide