05-04-2005 02:28 PM
Using 2611 Router with WIC-1AM (modem). Attempting to dial-out to ISP over 56K dial-up. Modem connects briefly then hangs up because of some type of authorization problem (I think its a CHAP/PAP problem). I have included router config info and debug info attachments, but changed passwords, etc. for obvious reasons.
Can someone tell me via the debug messages what the problem is? Are there Cisco troubleshooting manuals or modem documents that I can locate to understand what the detailed modem acknowledgements are telling me?
Thanks greatly for any help provided.
KM
Solved! Go to Solution.
05-05-2005 02:40 AM
Try changing the ppp authentication command to
ppp authentication pap chap callin
I believe the default bahaviour is to have two-way authentication which your ISP is not going to have configured. Adding the callin parameter to your config will force your router to only authenticate inbound calls from other routers and to hand over its username/password when it dials out.
HTH
Phil
05-05-2005 02:40 AM
Try changing the ppp authentication command to
ppp authentication pap chap callin
I believe the default bahaviour is to have two-way authentication which your ISP is not going to have configured. Adding the callin parameter to your config will force your router to only authenticate inbound calls from other routers and to hand over its username/password when it dials out.
HTH
Phil
05-05-2005 12:20 PM
Made this change, fixed the problem. Phil, thanks for the astute diagnosis.
Additionally, for others with similar problem, see Cisco documents: Configuring and Troubleshooting PPP Password Authentication Protocol (PAP), and PPP Authentication Using the PPP CHAP Hostname and PPP Authentication CHAP Callin Commands
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide