07-02-2015 10:48 PM
Currently I am at a very basic level of understanding and have gotten internet access through pep link to router and appear to have achieved an active VPN connection. VPN connection is active, but the traffic counters are at 0. When I change ACL sequence, it connects perfectly.
Using Router 2800
Solved! Go to Solution.
07-04-2015 12:42 PM
There is not enough information given here for us to understand the problem or to suggest solutions. If you change the ACL sequence number and it connects perfectly then perhaps the problem is solved?
HTH
Rick
07-04-2015 12:42 PM
There is not enough information given here for us to understand the problem or to suggest solutions. If you change the ACL sequence number and it connects perfectly then perhaps the problem is solved?
HTH
Rick
07-06-2015 08:16 PM
set up IPSec VPN through our cisco 2800 router and Radius on Linux here at our company so that people could access network resources from home. The problem is, when VPN connect it can’t ping any required server. When problem occur I change that user ACL sequence and it connect perfectly then. But sometime later this problem occurs again with that user.
This is happening with all VPN users. Sometime they connect properly but sometime they don’t.
Is it IOS problem?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide