Adding additional Anyconnect client to ASDM/ASA

[Steve Coady]

Hello

What are the xact steps requireed to accomplish this task?

Are there any concerns with disruptions of service either to ASA or simply other current VPN clients?

[Marvin Rhoads · Accepted solution]

Just:

1. upload the AnyConnect image package files to the ASA

2. Add them to the webvpn section with the "anyconnect image " command.

Reference (cli)

Reference (ASDM).

There is no impact to current VPN clients but you should load the ones you want to be preferred closer to the top of the list, as noted in the 2nd reference above.

[Steve Coady]

Marvin

Thank you for yor reply.