02-01-2008 01:20 AM - edited 02-21-2020 03:31 PM
I will be upgrading our Pix and Concentrator to 2 x ASA 5520's soon (Active /standby). I will move the Site-to-Site VPN's over but I was then thinking is it possible to add QoS from the ASA's to the Cisco VPN routers at our remote offices?
These small offices use Cisco 877's and 1841's on DSL lines with the NBAR option turned on.
02-07-2008 06:52 AM
In order to implement the QOS, complete these steps:
Identify the traffic or define the traffic classes.
Associate actions with each traffic class in order to formulate policies with the use of Policy Map.
Issue the service-policy command in order to activate the policies.
Use the service-policy command in order to apply the policy map globally or to a specific interface.
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/qos.html#wp1051164
02-11-2008 06:52 AM
What config changes need to be made on the router at the remote end?
I have a very similar requirement... trying to figure out how to implement QoS/VoIP between an ASA5520 and Cisco 871s on DSL/Cable.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide