07-22-2015 06:14 AM - edited 02-21-2020 08:21 PM
So I have AnyConnect working on one ASA however from another ASA located in another country I'm getting the following error:
"Failed to get configuration from secure gateway"
I get a prompt for username and password appears to be authenticating just fine however during the "checking for profile updates" step that error appears.
I've been comparing my two configurations and they seem identical.
Model of working ASA: 5512 ver 9.1(4)
Not working ASA: 5510 ver 9.1(4)
Client version: 4.1.02011
Any ideas?
Thanks
Solved! Go to Solution.
07-23-2015 12:35 AM
Hello, Kevin.
As far as I know, if there is no client profile configured on ASA, the Anyconnect client software will use the default client profile, which is placed on local computer (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) during the installation of Anyconnect software.
07-22-2015 06:28 AM
Hello, Kevin,
I see the similar post here, please check:
So, be sure, that AnyConnect profile (usually, .xml file) is on the flash of second ASA (use command dir for verification), and this profile is configured under webvpn section:
webvpn
anyconnect profiles <profile name> disk0:/profile-name.xml
and under the group-policy in webvpn section:
group-policy GroupPolicy_VPN attributes
webvpn
anyconnect profiles value <profile name> type user
07-22-2015 12:01 PM
Interesting..
Wanted to delete and recreate my Anyconncet client profile.. so I deleted it.. and out of curiousity I tested connecting before recreating it and it now works.. without a client profile.
I'm using ASDM to configure
07-23-2015 12:35 AM
Hello, Kevin.
As far as I know, if there is no client profile configured on ASA, the Anyconnect client software will use the default client profile, which is placed on local computer (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) during the installation of Anyconnect software.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide