Anyconnect clients software on 2901 router

[mbluemel]

Does anyone have instructions for adding multiple versions of Anyconnect client software on a 2901 router?

I need to have it for MAC and Windows but can only seem to add one or the other and cannot find any instruction on this.

Thanks in anticipation

[JP Miranda Z]

Hi mbluemel,

Try with a sequence number at the end of the command:

crypto vpn anyconnect flash:/webvpn/anyconnect-win-3.1.08009-k9.pkg sequence 1
crypto vpn anyconnect flash:/webvpn/anyconnect-macosx-i386-3.1.08009-k9.pkg sequence 2
crypto vpn anyconnect flash:/webvpn/anyconnect-linux-64-3.1.08009-k9.pkg sequence 3

On versions of code which were released before 15.2(1)T:

webvpn install svc flash:/webvpn/anyconnect-win-3.1.08009-k9.pkg sequence 1
webvpn install svc flash:/webvpn/anyconnect-macosx-i386-3.1.08009-k9.pkg sequence 2
webvpn install svc flash:/webvpn/anyconnect-linux-64-3.1.08009-k9.pkg sequence 3

Hope this info helps!!

Rate if helps you!!

-JP-

[mbluemel]

Hi JP

Thanks for the reply but this I had tried this and get the following output:

tintern(config)#$ebvpn/anyconnect-macosx-i386-4.2.06014-k9.pkg sequence 1
Cannot open the package (flash0:/webvpn/anyconnect-macosx-i386-4.2.06014-k9.pkg)
tintern(config)#$ flash0:/webvpn/anyconnect-win-4.1.08005-k9.pkg sequence 5
Cannot open the package (flash0:/webvpn/anyconnect-win-4.1.08005-k9.pkg)

Thanks

Martin

[JP Miranda Z]

Martin,

Can you share a show version and a show flash of your 2901?

Hope this info helps!!

Rate if helps you!! 

-JP-

[mbluemel]

HI JP

Attached output requested.

Thanks

Martin

[JP Miranda Z]

Martin,

Can you share the full command you are using when getting this error:
Cannot open the package (flash0:/webvpn/anyconnect-macosx-i386-4.2.06014-k9.pkg)

Hope this info helps!!

Rate if helps you!! 

-JP-