Hi,
Our requirement is to configure an ASA 8.3(2) which terminates VPN Anyconnect (Mobile IPAD users/and PC) as the DHCP server for those clients. I DO NOT want to use local pools.
The Anyconnect clients should then receive a IP on the 192.168.1.0/28 scope, (Our Inside LAN Interface on the ASA also sits within that network on 192.168.1.4/28)
I want the ASA to use itself as the DHCP server but ONLY for Anyconnect clients. Is this possible? No clients on the LAN will require DHCP.
Reason being; I want to specify a DHCP option 150 for the VPN clients, so the Cisco Mobile App or IP Communicator will receive the TFTP server IP Address.
Currently using local pools the Anyconnect works a treat, but cant get the softphones to work without manually editing the registry to point to the TFTP server and doing some other hacks.
Thankyou in advance
