cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
938
Views
0
Helpful
2
Replies

Anyconnect VPN Client Windows Install Settings

darreng
Level 1
Level 1

Is it possible to change the install settings of the Anyconnect Client so it doesn't end up in the Startup Menu. We wish to automate the installation of the above across a few devices but don't want the client added to the startup automatically.

Regards

Darren

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
Hall of Fame
Hall of Fame

There's no command switch you can do directly with AnyConnect installer.

You may be able to write your own custom installer to modify this behavior for Windows clients.

http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect44/administration/guide/b_AnyConnect_Administrator_Guide_4-4/customize-localize-anyconnect.html#concept_6F5FB8515AF0456C96D76F4577893FBD

View solution in original post

2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

There's no command switch you can do directly with AnyConnect installer.

You may be able to write your own custom installer to modify this behavior for Windows clients.

http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect44/administration/guide/b_AnyConnect_Administrator_Guide_4-4/customize-localize-anyconnect.html#concept_6F5FB8515AF0456C96D76F4577893FBD

Thank you Marvin for your kind reply and the URL link. Very useful and informative.

Regards

Darren