I have configured AnyConnect for remote VPN access and everything works fine minus the annoying warning the pops up when connecting. Users pull an IP address from the pool I created, but are unable to access any network resources on the LAN. I have an exempt rule in there to prevent NAT from happening, but i'm not sure it is actually working. Has anyone seen this before and if so how do you fix it?
Here is my current configuration.
hostname *****
domain-name *****
enable password 8Ry2YjIyt7RRXU24 encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd 2KFQnbNIdI.2KYOU encrypted
names
ip local pool AnyConnect-Users 192.168.69.1-192.168.69.254 mask 255.255.255.0
!
interface GigabitEthernet0/0
speed 100
duplex full
nameif TW_Interface
security-level 0
ip address X.X.X.X Y.Y.Y.Y
!
interface GigabitEthernet0/1
speed 100
duplex full
nameif DMZ
security-level 50
ip address 10.100.20.1 255.255.255.0
!
interface GigabitEthernet0/2
speed 100
duplex full
nameif ERS_Lan
security-level 100
ip address 10.100.10.3 255.255.255.0
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
!
boot system disk0:/asa911-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name ****
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network NETWORK_OBJ_192.168.69.0_24
subnet 192.168.69.0 255.255.255.0
access-list ERS_Lan_access_in extended permit ip any object NETWORK_OBJ_192.168.69.0_24
access-list ERS_Lan_access_in extended permit ip any any
pager lines 24
logging asdm informational
mtu TW_Interface 1500
mtu DMZ 1500
mtu ERS_Lan 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-711-52.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (ERS_Lan,TW_Interface) source static any any destination static NETWORK_OBJ_192.168.69.0_24 NETWORK_OBJ_192.168.69.0_24 no-proxy-arp route-lookup
!
object network obj_any
nat (ERS_Lan,TW_Interface) dynamic interface
access-group ERS_Lan_access_in in interface ERS_Lan
route TW_Interface 0.0.0.0 0.0.0.0 X.X.X.X 1
route ERS_Lan 192.168.4.0 255.255.255.0 10.100.10.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server AnyConnect-VPN protocol radius
aaa-server AnyConnect-VPN (ERS_Lan) host 192.168.4.4
timeout 5
key *****
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.100.10.0 255.255.255.0 ERS_Lan
http X.X.X.X 255.255.255.255 TW_Interface
no snmp-server location
no snmp-server contact
no sysopt connection permit-vpn
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable TW_Interface
anyconnect-essentials
anyconnect image disk0:/anyconnect-linux-3.1.02026-k9.pkg 1
anyconnect image disk0:/anyconnect-macosx-i386-3.1.02026-k9.pkg 2
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 3
anyconnect enable
tunnel-group-list enable
group-policy GroupPolicy_AnyConnect-VPN internal
group-policy GroupPolicy_AnyConnect-VPN attributes
wins-server none
dns-server value 192.168.4.4
vpn-tunnel-protocol ssl-client
default-domain value ERS2WAY.COM
tunnel-group AnyConnect-VPN type remote-access
tunnel-group AnyConnect-VPN general-attributes
address-pool AnyConnect-Users
authentication-server-group AnyConnect-VPN
default-group-policy GroupPolicy_AnyConnect-VPN
tunnel-group AnyConnect-VPN webvpn-attributes
group-alias AnyConnect-VPN enable
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:84b2580f961392f49d89ff767e867385
: end
