Hello,
it is running ASA 9.1(5) on my 5505 and I can connect a VPN with my iPhone/iOS 9 over IPSec. Since iOS 8 it shows a connection on both sites but I can´t access to my network-components in my home-network. Does it need a new setting since Apple iOS8?
These are my settings:
____________________
object network NETWORK_OBJ_10.10.10.0_29
subnet 10.10.10.0 255.255.255.248
username a11 password WDQ2sa2IVt6AlpMm encrypted privilege 0
username a11 attributes
vpn-group-policy g1
exit
group-policy g1 internal
group-policy g1 attributes
vpn-tunnel-protocol ikev1
exit
tunnel-group g1 type remote-access
tunnel-group g1 general-attributes
default-group-policy g1
address-pool vpnpool1
tunnel-group g1 ipsec-attributes
ikev1 pre-shared-key **********
nat (inside,outside) 2 source static any any destination static NETWORK_OBJ_10.10.10.0_29 NETWORK_OBJ_10.10.10.0_29 no-proxy-arp route-lookup
______________________________________________
Regards
Jürgen
