01-20-2023 10:23 AM
Hi. ASA 5525 Anyconnect user login period is now about 1 minute. Usually it takes a couple seconds.
Last night a new device was installed that connects to the ASA5525 on one end, and a vendor tunnel on the other end. I cannot log into the new device.
May you please suggest a troubleshoot strategy, including commands?
Thank you!
Solved! Go to Solution.
01-20-2023 02:46 PM
Upon investigation, this is connected to a mission critical HA ASA failover event. I have opened a TAC case. There is no need to respond further.
Thank you.
01-20-2023 10:28 AM
you face slow or not connect ??
01-20-2023 10:42 AM - edited 01-20-2023 11:10 AM
successful connection after about slow 1 minute. Before was 1 -2 seconds. (It seems it is not authentication server, because client passes these screens very quickly.) Once connected, speed is fine. CPU is not stressed.
01-20-2023 02:46 PM
Upon investigation, this is connected to a mission critical HA ASA failover event. I have opened a TAC case. There is no need to respond further.
Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide