ASA and Ldap error

[Babek Khudiyev]

[10] Session Start
[10] New request Session, context 0xbc8df138, reqType = Authentication
[10] Fiber started
[10] Creating LDAP context with uri=ldap://10.0.2.5:389
[10] Connect to LDAP server: ldap://10.0.2.5:389, status = Successful
[10] supportedLDAPVersion: value = 3
[10] supportedLDAPVersion: value = 2
[10] Binding as administrator
[10] Performing Simple authentication for administrator to 10.0.2.5
[10] Simple authentication for administrator returned code (49) Invalid credentials
[10] Failed to bind as administrator returned code (-1) Can't contact LDAP server
[10] Fiber exit Tx=212 bytes Rx=607 bytes, status=-2
[10] Session End

[JP Miranda Z]

Hi Babek,

If you are completely sure the LDAP configuration if fine and you have a valid dsquery from the server looks like you have a credentials issue:

Simple authentication for administrator returned code (49) Invalid credentials

This is a pretty good guide that you can follow to make sure everything is properly configured:

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98625-asa-ldap-authentication.html

Hope this info helps!!

Rate if helps you!! 

-JP-