06-01-2014 11:46 AM
Hi All... quick ASA question...
Does anyone know the state of support for OWA with Exchange 2013 and the ASA's clientless webvpn access?
I know the ASA has a template for 2010... does it work with 2013? Is there are 2013 template in the pipeline for the ASA?
Thanks!
Solved! Go to Solution.
06-02-2014 01:37 AM
Hi Paul,
There is an enhancement (CSCul27869) that is opened for Exchange 2013 to be supported with ASA.
CSCul27869
This is an enhancement request to add support for OWA 2013 with webvpn.
https://tools.cisco.com/bugsearch/bug/CSCul27869/?reffering_site=dumpcr
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.
06-02-2014 04:30 AM
Hi Paul
From my first test's and experiences it does not work at all. only the following screen is shown after the login:
So we pray for cisco to provide support in near future!
Any other expiences or working solutions like SED or other?
06-02-2014 01:37 AM
Hi Paul,
There is an enhancement (CSCul27869) that is opened for Exchange 2013 to be supported with ASA.
CSCul27869
This is an enhancement request to add support for OWA 2013 with webvpn.
https://tools.cisco.com/bugsearch/bug/CSCul27869/?reffering_site=dumpcr
Regards,
Dinesh Moudgil
P.S. Please rate helpful posts.
06-02-2014 02:21 AM
Dinesh,
Thanks for this. Do I take this to mean the OWA 2010 support will not work with OWA 2013 and I need to wait for the enhancement?
Thanks,
P
06-02-2014 03:52 PM
Paul,
The enhancement is for OWA 2013 . For OWA 2010 ,you can check your supported ASA version in this link.
Regards,
Dinesh Moudgil.
06-02-2014 04:30 AM
01-14-2015 04:33 AM
I am running OWA 2013 with smart tunnel. If can not use smart tunnel you can use OWA 2013 light. It looks pretty much like OWA 2007.
To configure SSO you have to add a bookmark
URL https://<exchange-server>/owa/auth.owa
Enable smart tunnel
then advanced options
URL Method: Post
Post Parameters:
destination https://<exchange-server>/owa
flags 4
forcedownlevel 0
username domain\CSCO_WEBVPN_USERNAME
password CSCO_WEBVPN_PASSWORD
isUtf8 1
passwordText (important empty value field!)
trusted 0
This will work for full OWA via smart tunnel. If you want OWA light without smart tunnel you have to replace flags 4 with flags 5 and disable smart tunnel. And enable this http://theucguy.net/enable-owa-light-in-exchange-2013/
01-22-2015 12:50 PM
Thanks!...smart tunnel worked for us...
01-27-2015 04:11 PM
Hi Paul, according to TAC:
"Unfortunately at this point I cannot support OWA 2013 on webvpn , currently the bug is an enhancement. OWA 2013 is a high priority feature, and we are working towards road mapping it for the March 2015 release."
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide